Textile Important QUESTIONS
a)Newton b) Carothers c) Levi Strauss d) Lee Cooper
Q2. Which fabric is flax fibre made into?
a) Denim b) Drill c) Linen d) Umbrella
Q3. Which type of fabrics are Velvet and Corduroy?
a) Pile b) Ply c) Crepe d) Backed Cloth
Q4. Who is considered to be the Inventor of denim jeans?
a) Lee b) Cooper c) Newton d) Levi Strauss
Q5. What is the fibre source of Cashmere fibre?
a) Goat b) Sheep c) Camel d) Yak
Q6. Which one is the first step in spinning?
a) Draw frame b). Carding c). Blowroom d). Ring spinning
Q7. Man-made fibres cut into short lengths that emulate raw natural fibre?
a) Wool b). Staple c). Filament d). None of these
Q8. Weaves can be created on______ looms.
a) Cam b). Dobby c). Jacquard d). all of these
Q9. Types of warp knitting are:
a) Interlock b). Tricot c). Rib-knit d). Float jacquard
Q.10. Wool can absorb up to _____ % of its weight in moisture:
A). 10 b). 20 c). 30 d). 40
Q11. Which of the following fabrics is suitable for making the evening gown?
a. Satin b Flannel c. Gabardine d. Silk tweed
Q12. Which of the following fibers is a synthetic fiber?
a. Polyester b. Viscose rayon c. Flax d. Wool
Q13. A broad term referring to any material that can be made into a fabric by any method:
a) Yarn b) fiber c) twine d) textiles
Q.14. The natural raw material used maximum is-
a) Polyester b) Wool c) Jute d) Cotton
Q.15. Filament yarn is available in-
a) Polyester b) Wool c) Cotton d) Flax
Q.16. Major defects of yarn, which affect fabric quality are-
a) Slubs b) Neps c) Hairiness d) Snarl
Q.17. What is fiber?
Ans- hair like basic textile material
Q.18. What
Ans- yarn made from fibers
Q.19. What is the filament yarn?
Ans- yarn with an infinite length
Q. 20. What is
Ans- the number of hanks per pound
Q.21.What are natural fibres?
Ans- fibers available in nature
Q. 22. What are man-made fibers?
Ans- fibers made by a chemical process
Q.23. Name the primary motions of the loom?
Ans- Shedding, picking and beating
Q.24. How many shuttles should be available on any loom?
Answer- 2
Q.25. With what equipment a broken warp should be drawn through
Answer- drawing hook
Q.26. How a wrong denting of warp will be seen in the fabric?
Q.27. What will happen if a type of knot, other than a weaver’s knot, is used to join broken warp?
Ans- knot may slip/ be large
Q.28. In case of a warp break, with which yarn it should be joined?
Ans- only with extra warp yarns
Q.29. What happens if the warp yarn is very hairy?
And- it may produce
Q.30. What should be done along slub is observed in the warp before weaving?
Ans- should replace with fresh yarn
Q.31. What should be done if a moving part is observed excessively hot?
Ans- officer should be informed immediately
Q.32. What precautions should be taken for your clothing while coming on duty to operate loom?
Ans- loose clothing should be avoided
Q.33. What should be done to save dust and fly from being breathed in?
Ans- face mask should be used.
Q.34. What method of putting off the fire should be avoided in case of fire from the short circuit?
Ans- water spray should be avoided.
Q.35. What should be done to avoid spreading of fire in the department?
Ans- air inlets should be closed
Q.36. What precautions should be taken for a person with heavy bleeding from the hand?
Ans- raise a hand, shift for treatment.
Q.37. Why a machine is called powerloom?
a) Because it runs from electric power
b) Because its motion is very powerful
c) Because it is used to make good quality fabrics
d) Because Shuttle is not used to insert the weft yarn
Answer- (a)
Q.38. Front rest of the loom is situated at-
a) Left hand side
b) Right hand side
c) Front side
d) Back side
Answer- (c)
Q.39. Function of the head is too-
a) Insert weft
b) Open space for shuttle
c) Beat the pick
d) Move the fabric
Answer-(b)
Q.40. What is the function of the shuttle?
a) To protect warp
b) To hold the fabric
c) To carry the weft through the warp
d) To cut the fabric
Answer-(c)
Q.41. The weave used with minimum ends and picks per inch is-
a) Twill
b) Plain
c) Hopsack
d) Satin
Answer-(b)
Q.42. A woven fabric is made with the intersection of-
a) Different warps
b) Different wefts
c) Warp and weft
d) Only one yarn
Answer-(c)
Q.43. ________knot should be used to join yarn on the loom.
a) Single knot
b) Double knot
c) Weaver’s knot
d) Fisherman’s knot
Answer-(c)
Q.44. If there is a warp break, it must be drawn keeping in mind following-
a) Drafting and denting
b) Only drafting
c) Only denting
d) Only lifting
Answer-(a)
Q.45. Drafting on a loom means-
a) Writing looms report
b) Removing fly
c) Order of drawing warp threads through the heads
d) Order of drawing warp threads through the reed
Answer- (c)
Q.46. The fabric damage due to defective lets off motion is-
a)
b) Warp streaks
c) Torn fabric
d) Stained fabric
Answer-(a)
Q.47. How will you remove holes in the fabric near selvedge?
a) Check the selvedge yarn
b) Check the reed
c) Adjust heads
d) Check the temples
Answer-(d)
Q.48. What is included in housekeeping around a loom?
a) Better cleaning of the floor
b) Better cleaning of the machine
c) Good cleaning and placing everything in its right place
d) Fixing good pictures on the loom
Answer-(c)
Q.49. What should be done if the operator has to leave the loom for a short duration?
a) Ask the adjacency operator to look after
b) Depute a trainee to look after
c) Inform the supervisor
d) Inform the jobber
Answer-(a)
Q.50. Why loom should be cleaned?
a) For shining
b) For better performance
c) For getting appreciation
d) For safety purposes
Answer- (b)
Q.51. Why oiling should be done on a machine?
a) To follow the supervisor’s orders
b) To save machine paint
c) To reduce wear and tear
d) To clean machine parts
Answer- (c)
Q.52.Which fire extinguishers should be used if the fire is due to an electrical fault?
a) Powder type
b) Foam type
c) Sand buckets
d) Water from hydrant
Answer-(a)
Q.53. What should be done if a person has slipped on the floor and cannot work?
a) Inform the shift officer
b) Massage the injured part with oil
c) Apply ice on the effected part
d) Apply hot water on the affected part
Answer- (a)
1 Comments
please upload more questions
ReplyDelete